Gator Hobbies

This is the Castle Creations Phoenix-25 amp Brushless Sensorless ESC. This speed control is specifically designed for Brushless application. NOT to be used with Brushed motors. Doing so will ruin ESC.

FEATURES:

Extremely low resistance (.013 Ohm)

High rate (11kHz) switching

Up to 25A continuous current with proper air flow, 35A surge

Five to eight cells with four micro servos

Up to ten cells with three micro servos

16 cells max with BEC disabled

Dynamic braking ensures folding props fold properly

BEC (1.5A) provides power to receiver and servos-eliminates need for a separate receiver battery

User programmable features:

Low voltage cutoff

Over-current protection

Brake type

Throttle range

Timing advance

Cutoff type

Soft start Ramp Up

Runs motor in forward or reverse

Auto motor in cutoff with reset

Safe Power ON arming program ensures motor won't accidentally turn ON

Low torque soft start prevents damage to fragile gearboxes

Auto Shut Down when signal is lost or radio interference becomes severe

INCLUDES: Instruction sheets Phoenix 25 ESC

REQUIRES:

Soldering to motor and connector

Soldering iron

Solder

Battery connector (specific to customer's connectors)

SPECS:

Length: 1.5" (37mm)

Width: 1" (25.4mm)

Height: 3/16" thick (5mm)

Wire Length: 4" (102mm) motor ends 5.5" (140mm) battery end 7" (178mm) servo wire with Universal connecter

COMMENTS: Be sure to have correct polarity, incorrect polarity can damage the speed control unit